Cannondale Scalpel Lab 71 (2024)

2.092,0 gr  / 73.79 oz

GENERAL DATA

Brand logo

Year: 2024

Brand: Cannondale

Model: Scalpel Lab 71

Size: L

Wheel size: 29er

Material: Carbon Fiber

Discipline: Full Suspension MTB

Travel: 120 mm

Brake system: Disc

Disc brake system: PM

Seat tube diam: 31,6 mm

Rear axle type: BOOST (12x148mm)

Bottom bracket type: BSA 73

Headset type: Integrated (IS)

Manufacturer Website: Here

Geometry

Frame geometry
Vertical distance from the centre of the bottom bracket to the mid point at the head tube
 Stack:
Horizontal distance from the centre of the bottom bracket to the middle of the head tube
 Reach:
Angle between the ground and the head tube
 Head angle: 66.66ยบ
Position of the saddle relative to a horizontal line through the crank axis
 Seat angle:
Distance from the bottom of the head tube to the top of the head tube.
 Head tube length:
Distance from the center of the bottom bracket to the center of the front hub.
 Front center:
Distance from the center of the bottom bracket to the center of the rear axle
 Chainstay length:
Horizontal distance from the rear axle to the front axle
 Wheelbase:
Distance by which the center of the bottom bracket lies below the level of the rear hub.
 Bottom bracket drop:
Distance from the center of the bottom bracket to the center of where the seat tube and top tube connect
 Seat tube length:
Horizontal distance from the top tube/head tube junction to the seat tube
 Top tube length:
Height of the bottom bracket measured from the ground
 Bottom bracket height:
Distance from the ground to the top of the top tube. In case of a sloping, measure at the midlength of the tube
 Bike standover height:
Distance between the point where the wheel contacts the ground and the point where the steering axis of the front wheel intersects the ground
 Trail:

DESCRIPTION & COMMENTS

Description: Fox Float DPS (190x40mm) - 263gr

Comments: Pesada con protecciones y sin eje trasero.

Info created & shared by: Lightbiker

Source: https://light-bikes.fr/viewtopic.php?f=45&t=5838

 Back