Orbea OIZ OMR (2021)

2.090,0 gr  / 73.72 oz

GENERAL DATA

Brand logo

Year: 2021

Brand: Orbea

Model: OIZ OMR

Size: XL

Wheel size: 29er

Material: Carbon Fiber

Discipline: Full Suspension MTB

Travel: 100 mm

Brake system: Disc

Disc brake system: PM

Seat tube diam: 31,6 mm

Rear axle type: BOOST (12x148mm)

Bottom bracket type: Press-fit 92

Headset type: Integrated (IS)

Geometry

Frame geometry
Vertical distance from the centre of the bottom bracket to the mid point at the head tube
 Stack: 614.0
Horizontal distance from the centre of the bottom bracket to the middle of the head tube
 Reach: 476.0
Angle between the ground and the head tube
 Head angle: 69.0º
Position of the saddle relative to a horizontal line through the crank axis
 Seat angle: 75.0º
Distance from the bottom of the head tube to the top of the head tube.
 Head tube length: 120.0
Distance from the center of the bottom bracket to the center of the front hub.
 Front center:
Distance from the center of the bottom bracket to the center of the rear axle
 Chainstay length: 435.0
Horizontal distance from the rear axle to the front axle
 Wheelbase: 1173.0
Distance by which the center of the bottom bracket lies below the level of the rear hub.
 Bottom bracket drop: 47.0
Distance from the center of the bottom bracket to the center of where the seat tube and top tube connect
 Seat tube length: 520.0
Horizontal distance from the top tube/head tube junction to the seat tube
 Top tube length: 641.0
Height of the bottom bracket measured from the ground
 Bottom bracket height: 327.0
Distance from the ground to the top of the top tube. In case of a sloping, measure at the midlength of the tube
 Bike standover height: 749.0
Distance between the point where the wheel contacts the ground and the point where the steering axis of the front wheel intersects the ground
 Trail:

DESCRIPTION & COMMENTS

Info created & shared by: Lightbiker

Source: https://imgur.com/gallery/orbea-oiz-custom-build-t30IvoH

 Back